Ekinex EK-GM2-DL Manual de início rápido - Página 5

Procurar online ou descarregar pdf Manual de início rápido para Regulador de fluxo luminoso Ekinex EK-GM2-DL. Ekinex EK-GM2-DL 6 páginas. Dali 1-channel dimmer

Imprimir página

A flash of the LED loads indicates that the first menu has

been accessed: "MENU 1". The access to each menu is

sequential.

Menu 1: minimum dimming value setting

Each single click allows you to vary between 7 minimum

dimming values. The following minimum levels are availa-

ble: 0.1%, 1%, 5%, 10%, 20%, 30% and 100%.

Once the minimum dimming value has been selected,

then long press to confirm: a double flash confirms the

passage to MENU 2.

Note. Only in case the minimum level is set to

100%, once the setting is confirmed, the device au-

tomatically exits the MENU.

Menu 2: power-on ramp (fade in) setting

Each single click allows to set the fade in. The following

"fade in" times are available: instantaneous, 1 second, 2

seconds, 3 seconds, 6 seconds.

Once the "fade in" time has been selected, then press

and hold to confirm: three flashes confirm the passage

to MENU 3.

Menu 3: power-off ramp (fade out) setting

Each single click allows to set the fade out. The following

"fade out" times are available: instantaneous, 1 second, 2

seconds, 3 seconds, 6 seconds.

After selecting the "fade out" time, then long press to con-

firm: three quick flashes confirm the storage of the set-

tings and the exit from the menu.

Once exited the menu, the LED load connected to the

dimmer output turns on at the minimum value set.

Functions

Relationship between DALI bus and local commands:

on power-up, in case the bus connection is not present,

the local command is active. When the bus connection

is detected, the control passes to the bus. In the absen-

ce of the signal, if the local command is an N.O. button,

the control is passed to the local commands the button is

pressed.

Device addressing

• Simplified method (one ballast connected at a time):

each one will get the address progressively from 0 to

63;

• Random Address Allocation: by connecting all the bal-

lasts at the same time, each one will get a random

address.

Subsequently, the address configuration can be changed

by using an application for parameterization, for example

by downloading the ekinex CGEKBG1TP software to your

PC which allows to:

• configure the DALI system and define its parameters;

• set the DALI luminaires (groups, scenarios, IDs, etc.);

• test the communication on the DALI bus;

• update the device.

The software can be downloaded from www.ekinex.com

website and its use is described in the application manual

of the ekinex EK-BG1-TP DALI Gateway. The software

requires Microsoft Windows (7 and later).

DALI address map

The intensity and ON / OFF switching of the output is ma-

naged via the DALI channel.

Address

Dimensions[mm]

43.00

Marks

• CE: the device complies with the Electromagnetic

Compatibility Directive (2014/30/EU) and the RoHS 2

Directive (2011/65/UE).

• Reference

55015:2013+A1:2015,

50581:2012, IEC/EN 62386-101/102.

Note. In order to install and use the CGEKBG1TP

configuration software, it could be necessary the

installation of .NET Framework 4, which can bee

freely downloaded from Microsoft.com website.

Function

Map: dimmer

Dimmer

Dimmer (Intensity value) 0 .. 254

43.00

Standards:

61347-1:2015,

61547:2009,