DOnetworks DOFree Manual - Página 10

Procurar online ou descarregar pdf Manual para Auscultadores DOnetworks DOFree. DOnetworks DOFree 12 páginas. Bluetooth wireless headset & dongle

Gateway) will flash with short burst every 2 to 3 seconds, indicating the stand-by mode.

※ IMPORTANT NOTICE: To reduce battery consumption, the Headset and Dongle(Audio

Gateway) will automatically switch to "stand-by"mode after 30 seconds from the end of

an operation. You will notice this by the LED's short flashes on both the Headset and

Dongle(Audio Gateway). Once in "stand-by"mode, there will be instances where it will

require a few extra moments for the Headset and Dongle to "wake up" and recognize

each other to communicate, resulting in a momentary delay for the product to actually

become active. This is not a defect.

This is designed to prolong battery life and enable you to talk for a longer period of time.

IX. For the best Use

•Charge the Headset and Dongle(Audio Gateway) fully before use.

•Never disassemble this product.

•Do not use benzene, paint thinner or other solvents when cleaning this product.

•Do not apply a strong impact.

•Do not place this product near a fireplace or any other heat source.

•Avoid use with other electronics.

•For best audio quality, avoid use in areas with high radio frequency traffic or near

microwave emitting products (such as a microwave oven).

•The use of this product while driving is at the sole discretion and responsibility of the

user.

•Do not use this product in extreme temperatures (refer to specifications for operating

temperature).

•Use power adaptors provided in this kit only.

X. Troubleshooting, What to do if ....

1.If you cannot hear any sound.

•Check the volume of the Headset as well as that of the cellular phone.

•Make sure the Dongle(Audio Gateway) ear plug is connected properly to the cellular

phone and check if the Dongle(Audio Gateway) is ON.