Ekit JT Hotspot Conhecer o seu - Página 4

Procurar online ou descarregar pdf Conhecer o seu para Router sem fios Ekit JT Hotspot. Ekit JT Hotspot 10 páginas.

Insert the battery.

Close the back cover.

Important: make sure your device has enough

ventilation to stop it overheating. If it does

overheat and shuts down, put it in a well-ventilated

place to cool down before turning it on again.

Connecting to your JT Hotspot

You can connect to your JT Hotspot by Wi-Fi or with a USB cable.

When connecting with Wi-Fi, you can connect up to ten devices to

your JT Hotspot.

Connecting with Wi-Fi

Turn on your JT Hotspot by pressing the power button for

around five seconds. It'll take a few moments to start up, then the

Wi-Fi LED will glow blue and the network LED will glow green.

Turn on the device that you want to connect to the JT Mobile

Hotspot, making sure its Wi-Fi is switched on.

If the device you want to connect to the JT Hotspot

supports WPS, go to step 4. If not, go to step 6.

Set up WPS by pressing the WPS button on your JT Mobile

Hotspot until the Wi-Fi indicator flashes blue.

Select the ' J T_xxxxxx' network on the device you

want to connect (xxxxxx will be specific to the device) and follow

the prompts.