American Standard Silhouette 7185.001 Ficha de especificações - Página 2
Procurar online ou descarregar pdf Ficha de especificações para Cozinha & amp; Acessórios de casa de banho American Standard Silhouette 7185.001. American Standard Silhouette 7185.001 2 páginas. 18" island sink, americast
Imprimir página
7185.803/823 Top Mount
2" (51mm)
2-5/8"
OPTIONAL
(67mm)
FINISHED WALL
OR SPLASHBACK
3-1/2"
(89mm)
DIA.
9"
(229mm)
COUNTERTOP
SEALING COMPOUND
(BY OTHERS)
9-1/8"
(232mm)
1-1/2" O.D. TAILPIECE
NOTES:
*
TEMPLATE PROVIDED WITH MOUNTING KIT 791326-100 FOR
EXPOSED FAUCET DECK OR UNDERCOUNTER FAUCET DECK
COUNTERTOP CUTOUT VARIATIONS.
FITTINGS AND UNDERCOUNTER MOUNTING KIT NOT INCLUDED
AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
4-5/8"
(117mm)
1-1/2" (38mm)
C/L
DIA. HOLES TYP.
2"
2"
(51mm)
(51mm)
2"
(51mm)
7-3/8"
(187mm)
18"
(457mm)
*
CUTOUT NOTE
18"
(457mm)
1/2"
(13mm)
36" (914mm)
SUGGESTED
5-3/4"
(146mm)
FINISHED FLOOR
NOTES:
*
TOP MOUNT (7185.803): COUNTERTOP CUTOUT
425mm x 425mm WITH 25mm RADIUS (16-3/4 X 16-3/4 WITH 1" RAD.)
AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaflet.
Undercounter Mount
FINISHED WALL
OR SPLASHBACK
2" (51mm)
2-5/8"
(67mm)
OPTIONAL
3-1/2"
(89mm)
DIA.
MOUNTING CLIP
(SEE DETAIL)
1-1/2"
9"
(38mm)
(229mm)
DIA.
(457mm)
SEALING COMPOUND
9"
(229mm)
1-1/2" O.D. TAILPIECE
G38
SILHOUETTE™ 18"
ISLAND SINK
AMERICAST
4-5/8"
1-1/2" (38mm)
C/L
(117mm)
DIA. HOLES TYP.
2" (51mm)
7-3/8"
(187mm)
18"
(457mm)
DETAIL OF MOUNTING CLIP
(KIT No.791003-100)
BRASS INSERT
SINK
*
CUTOUT NOTE
REFER TO INSTRUCTIONS
18"
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
COUNTERTOP
(BY OTHERS)
36" (914mm)
SUGGESTED
5-3/4"
(146mm)
FINISHED FLOOR
Revised 2/08
®
1/2" (13mm) MIN.
CLIP
MACH.
SCREW