Dongcheng DSM05-230 Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Moedor Dongcheng DSM05-230. Dongcheng DSM05-230 9 páginas.

do not work the grinder in the A direction or it will cut into the workpiece. Once the

edge of the wheel has been rounded off by use, the wheel may be worked in both

A and B direction.

MAINTENANCE AND INSPECTION

CAUTION:

 Always be sure that the tool is switched off and unplugged before attempting to

perform inspection or maintenance.

Cleaning Air Vents

The tool and its air vents have to be

kept clean. Regularly clean the tool's

air vents or whenever the vents start

to become obstructed. (Fig. 7)

Inspecting and Replacing

Carbon Brushes

Remove and check the carbon

brushes regularly. Replace when

they wear down to the limit mark.

(Fig. 8)

Keep the carbon brushes clean and

free to slip in the holders. Both

carbon brushes should be replaced

at the same time. Use only identical

carbon brushes.

Use a screwdriver to remove the

motor housing covers. Take out the

-11-

worn carbon brushes, insert the new ones and secure the brush holder caps.

(Fig. 9)

※Damaged cord must be replaced by a special cord purchased from authorized

service center.

※ To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or

adjustment should be performed by authorized centers, always using original

replacement parts.

-12-