American Time SiteSync IQ Manual de instalação e operação - Página 3

Wireless Bell

The SiteSync IQ® Wireless Bell is a device which is triggered wirelessly by the SiteSync IQ System Controller. This Wireless

Bell may be triggered by programmed events in the system controller, on demand using the MAN button on the system

controller or the Circuit tab of the Remote Connect web interface (using a SiteSync IQ system controller with the Ethernet

option and a computer with internet access).

Each Wireless Bell is factory set to one of the wired signal circuit relays in the system controller. The part number will

indicate which circuit of the system controller the bell is configured to (i.e. H004579-1 is set to circuit 1, H004579-2 is set

to circuit 2).

Part #

Description

H004579-1

set to Circuit 1

H004579-2

set to Circuit 2

H004579-3

set to Circuit 3

H004579-4

set to Circuit 4

H004579-5

set to Circuit 5

H004579-6

set to Circuit 6

The Remote Connect web interface allows for convenient

control of the Wireless Bell from a remote computer

(inside or outside of the facility). Timed events (ON,

OFF or 1-9 seconds duration) may be programmed for

wired and wireless signals. It also allows for on demand

(manual) control of these signals.

SiteSync IQ System Controller

Introduction

Ethernet

Link

Remote

Connect Web

Interface