Astonica 50103304 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Mobiliário de interior Astonica 50103304. Astonica 50103304 2 páginas.

Imprimir página
PARTS & HARDWARE LIST
PART #
A
Table top
B
Legs
Support Rings
C
8mm Threaded Studs
D
8mm Flat Washers
E
8mm Hex Nuts
F
G
6mm Flat Head Screws
H
6mm Flat Washers
6mm Hex Nuts
I
Parts Detail
A
E
D
G
H
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-800-843-2446.
NOTE: This product is intended for residential, non-commercial use.
DESCRIPTION
QUANTITY
B
F
I
1
Figure 1
1
A
4
2
8
8
8
8
8
8
C
CAUTION: Do not to over tighten bolts. Aluminum is a soft metal and threads
can easily be stripped.
1. Turn the table top (A) upside down on a flat, non-scratching surface.
2. Screw the four threaded studs (D) into the threaded holes underneath the table top.
Do not over tighten.
3. Turn the leg (B) upside down, and connect it to the table top with one washer (E),
and one hex nut (F).
4. Repeat Step 3 with the remaining three legs (B).
5. Align one of the support rings (C) with the legs at the bottom tabs. Secure using four
flat head screws (G), flat washers (H), and hex nuts (I) to hold it in place.
NOTE: The ring should be mounted so that when the table is turned upright,
the ring is on top of the tabs.
6. Repeat Step 5 with the other support ring.
7. Stand the table upright. Tighten all bolts securely.
ASSEMBLY INSTRUCTIONS
D
E
F
G
H
I
B
2
C