Astonica 50104020 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Mobiliário de interior Astonica 50104020. Astonica 50104020 2 páginas. 54'' oval wrought iron table

Imprimir página
PARTS & HARDWARE LIST
PART #
A
Table Top
B
Leg Assembly Part 1
C
Leg Assembly Part 2
D
Wing Nut
E
Plastic Center Hole Bushing
A
C
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
NOTE: This product is intended for residential, non-commercial use.
DESCRIPTION
B
D
E
1
QUANTITY
CAUTION: Do not over tighten fasteners.
1
1
1. (SEE FIGURE 1) Place table top (A)
1
upside down on a non scraching surface.
4
1
2.
(SEE FIGURE
upside down so that holes at the top
of assembly slide onto the threaded
studs premounted underneath
table top (A).
Attach the wing nuts (D) to threaded
studs and tighten securely.
3.
(SEE
FIGURE3) Slide the plastic
center hole bushing (E) onto the
center hole ring of leg assembly (C)
repeat step 2 with leg assembly (C).
The center support holes should fit
flush together.
Attach the wing nuts (D) to the
threaded studs and tighten securely.
4. (SEE FIGURE 4) Turn the assembled
table right side up.
Note: All four legs should sit flat.
If the table rocks, you have
the leg assemblies mounted
in reverse order. If so, repeat
step 2 reversing the placement
order of the legs.
ASSEMBLY INSTRUCTIONS
Figure 1
A
Figure 2
2) Turn leg assembly (B)
A
Figure 3
A
Figure 4
2
B
C
E
D
D