AMERICH PLATINUM Series Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Luminárias de casa de banho AMERICH PLATINUM Series. AMERICH PLATINUM Series 4 páginas.
Imprimir páginaon/o
control
bu on
GFCI
box
outlet
clear
tube
Always use dedicated outlets for each power supply.**
LU X U R Y S E R I E S
Always use dedicated outlets for each power supply.**
Always use dedicated outlets for each power supply.**
tub
pump
operating instructions
The Builder Series whirlpool is equipped with an On/Off Button (fill tub until
the highest jet is covered by at least 2" of water. Do not run pump without
water in the tub.)
1. Press the Button to start the pump.
2. Press a second time to stop the pump. The Control Box is manufactured
with a 10 minute timer that will turn off the unit automatically. To
continue your bath, simply push the Button to repeat the cycle.
Note: If OPTIONAL built in water level sensor is installed on your tub, fill the
tub with water until the water level sensor pad is covered. Now you can press
the Button to start the pump.
1. Press the Button to start the pump.
2. Press a second time to stop the pump. The Control Box is
manufactured with a 20 minute timer that will turn off the
unit automatically. To continue your bath, simply push the
Button to repeat the cycle.
Water Level Sensor
If water falls below water level sensor while pump is on, the system will
turn OFF.
Starts pump
Chromotherapy
1st Press: Auxiliary equipment ON > White
2nd Press: Slow rainbow cycle
3rd Press: Fast rainbow cycle
4th Press: Turquoise, Blue, Magenta, Red,
Orange, Yellow, Green
Return to slow rainbow cycle
Press and Hold 1 sec.: Auxiliary equipment OFF
Water Level Sensor
If water falls below water level sensor while blower is
on, the system will turn OFF.
3
B U I L D E R S E R I E S
P L AT I N U M S E R I E S O R
LU X U R Y S E R I E S + L I G H T
Stops Pump