Astonica 04-02-01024 Instruções de montagem - Página 2

Procurar online ou descarregar pdf Instruções de montagem para Fonte exterior Astonica 04-02-01024. Astonica 04-02-01024 2 páginas. Table fountain

PARTS & HARDWARE LIST

PART #

DESCRIPTION

Fountain Assembly

Copper Base

Plastic Liner

Lid

Pump

Bag of Decorative Rocks

Carefully remove the contents from the package. If any parts are missing do

not attempt to use the product until they have been obtained and correctly

installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-422-7800.

Caution: Do not over tighten fasteners.

QUANTITY

Figure 1

1. Connect the pump (E) to the lid (D) and fountain assembly (A) as pictured. Place the

pump (E) into plastic liner (C) and fill with 6" of water and close with lid (D).

2. Place the plastic liner with fountain assembly into the copper base (B), and cover

lid with decorative rocks (F). Gently adjust leaves to ensure proper flow of water.

3. Do not plug in pump before filling container with water. Doing so may damage pump.

4. Use distilled water, if possible to fill container.

5. To adjust speed of water flow: unplug pump, remove lid, move switch on pump (E)

toward "+" positive to increase water flow, or "-" to decrease water flow.

6. Check water level periodically, add water if necessary.

7. If water is not flowing, check pump (E) or fountain assembly (A) for clogs. Pump may

build up calcium after a long period of time and stop running when tap water is used.

Any calcium remover can be used to clean pump.

ASSEMBLY INSTRUCTIONS

COPPER STEM

CORD

PUMP