Astonica 50104112 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Tenda Astonica 50104112. Astonica 50104112 3 páginas.
Imprimir páginaSEE FIGURE 2. Secure the lower sliders
2.
on each corner by holding the top leg
down with one hand while moving the
slider up with the other until the push
"snap" button engages the hole in the
slider. Repeat this process to secure all
four corners.
SEE FIGURE 3. Working on any to adjacent
3.
legs, lift the gazebo frame (A) and slide out
the inner sliding legs until the push "snap"
button engages the hole in the bottom of
the outer leg. Repeat for the other two legs.
SEE FIGURE 4. Secure the leg cover
4.
fabrics' lower ends to the legs by hooking
the clip into the hole in the bottom of the
legs.
5. SEE FIGURE 5: Secure the gazebo in
position by driving ground stakes (D)
through the foot of each of the legs.
Attaching one end of the anchor ropes (C)
to the top corner "D" rings of the gazebo
and to a ground stake (D) in the other.
FIGURE 2.
FIGURE 3.
FIGURE 4.
FIGURE 5.
C
D
D
ASSEMBLY INSTRUCTIONS
TAKE DOWN:
1. SEE FIGURE 6: Remove all ground stakes
(D) and anchor
ropes (C) securing gazebo
(A).
2. SEE FIGURE 6 & 7: Unhook the leg cover
fabric, lower end hooks from holes in
lower legs.
3. SEE FIGURE 7: Working on any two
adjacent legs and with the help of an
assistant, lift the gazebo frame (A) and
depress the push "snap" buttons securing
the sliding inner and outer legs. Lift (slide)
the inner legs into the outer legs fully.
Lower the gazebo legs to the ground.
Repeat for the other two legs.
4. SEE FIGURE 8: Release the lower sliders
on each corner by depressing the push
"snap" buttons engaging the holes and
push down on the sliders.
FIGURE 6.
D
C
D
FIGURE 7.
FIGURE 8.