Door Knox VDP404 Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Sistema de intercomunicação Door Knox VDP404. Door Knox VDP404 13 páginas. Wireless external door entry kit
Imprimir página
Safety Instruction
1. Do not install the equipment in high temperature or high humidity environment.
2. Keep the unit away from televisions or intercom equipment that may cause interference.
3. Do not touch the screen with wet hands.
4. Always clean the equipment with a dry soft cloth. Do not use detergent, thinners,
volatile or corrosive liquids.
5. Keep the camera unit away from direct sunlight as this can affect the camera CCD.
6. Sometimes vehicle interference may cause blurred pictures.
7. Building walls or structures separating the camera and monitor will reduce wirefree
transmission strength and or distance.
System Installation
VDP404 Monitor
1. Remove battery cover, fit Lithium battery and replace cover. The plug top has a
USB type power connector and connect it to the monitor.
2. Plug the power adapter into a 100 ~ 240vAC 0.35A power source and open the
2.
bracket stand on the back of the monitor. The plugtop charger is 5vDC 1A and the
battery is a Lithium 3.7v DC battery.
NOTE: The same battery is fitted in the camera unit that also runs off a 12vDC power adapter.
You can charge the battery taken from the camera unit, in the monitor, using the USB type plugtop.
Monitor Standby Time: 3 days
Monitor Run Time: 2 hours
VDP301 Camera Unit
1. Connect the battery and fit the camera
into the rain shield. Ensure battery is
connected to correct polarity. The camera
unit can run directly from the battery or
be powered using the 100 ~ 240vAC 0.8A
power adapter that outputs 12vDC at 1.1A.
This can be used to charge the Lithium
3.7vDC battery or you can charge the battery
in the monitor using the USB plugtop.
Note the camera only works in the Rain Shield
Camera Standby Time: 31 days
Email:
Note that there is a magnet located in the rain
shield that will trigger the alarm in the camera
and on the monitor if the camera is removed
when power or battery is connected.
Camera Run Time: 2.5 hours
Doc XVDP400
Last Revised: 13/07/2017