Amerisun PowerSmart DB7651 Manual - Página 3

Procurar online ou descarregar pdf Manual para Ferramentas Amerisun PowerSmart DB7651. Amerisun PowerSmart DB7651 6 páginas. Auger belt tension adjustment

Imprimir página

Auger Belt Removal – DB7651

WARNING Entanglement Hazard -

performing any service procedures, make sure the

engine is off and remove the spark plug wire from the

spark plug to ensure the engine cannot accidently start.

Note: Record component position before disassembly, to

assist in reassembly.

1. Disconnect the upper cable from the auger control

handle.

2. Remove 2 hex head screws and remove belt cover.

3. Loosen the belt guide pin hex head screw (installed

on engine crankcase) and rotate the pin away from the

pulley.

Before

4. Left Side - Loosen the hex nuts attaching the auger

housing to the main frame.

5. Right Side – Remove the hex nuts, lock washers and

flat washers attaching the auger housing to the main

frame.

Rev 1.0 4-11-13