Astralpool Atomic V-AF Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para Equipamento de iluminação Astralpool Atomic V-AF. Astralpool Atomic V-AF 8 páginas. Wand

Brightness(remote)

The Atomic V has a brightness control to allow you to set the intensity and manage battery

life. To access the brightness menu, press the brightness button (the sun in the lower right

corner) on the remote. Eight blue dots in the brightness menu represent the eight brightness

levels. Move the cursor up and down, and press OK on the remote to select.

Battery meter(remote)

Your hoop also has a battery meter. Press the battery button on the remote and a series of

dots ranging from green to yellow to red will appear. These represent how much charge is

left on your battery.

Customization

Each pattern can be customized to a wide variety of color and speed settings. Once you are

playing a pattern, press the rabbit or sloth buttons on the remote to change the speed. Press

the left or right painters pallet buttons on the remote to change the color. The customized

pattern can be saved to the preset menus using the directions above.

Mega Mixes (the violet menu)

The Mega Mix patterns create a unique and continuous mix of patterns each time you use

them. See the Mega Mix chart below for more details.

Presets (the aquamarine and lavender menus)

The Atomic V has two menus where you can save up to 30 of your favorite patterns for

quick access in two different menus. These menus are aquamarine and lavender and are

found in the second and third menus. If you try to select a location in either preset menu

that does not already have a pattern stored, the cursor will blink red.

To store patterns in the preset menu: first, go to the pattern you would like to store.

While the pattern is running, hold the joystick forward for one second. The 15

aquamarine preset locations will now be displayed. Move the cursor to your choice of the

30 locations in either the aquamarine or lavender menus and push inwards to save it.

The wand will then go back to running that pattern and it will be stored in the chosen

preset location for later access. If you choose a location that already has a pattern

stored in it, that preset will be overwritten with the new pattern.

Customization

Each pattern can be customized to a wide variety of color and speed settings. Once you

are playing a pattern, tap left or right to customize the color of the pattern. Tap forward

to speed up the pattern or back to slow it down. When you find a customized pattern

you like, you can save it to your preset menu(s) by following the directions above.

Random and Scan modes

There is an orange random mode located on menus 3-7. This mode will randomly

generate a new pattern every time you select it. There are three scan modes at the end

of each menu after the Mega Mixes. The lime green mode will play each pattern in that

menu for 10 seconds. The pink mode will scan through each pattern in that menu for 10

seconds with a rainbow fade background. The purple mode will scan through each

pattern in that menu for 10 seconds with a rainbow flash background.