DAC RA711-GSM Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Telefone DAC RA711-GSM. DAC RA711-GSM 12 páginas.

Configure PIN change command [PIN]

The product is PIN protected for security purposes [default 1234] if a new PIN is required the

following command will change the PIN from 1234 to 5678:

PIN1234.5678.5678

The new PIN must be provided twice for confirmation and separated with a '.' [full stop].

The originator [the person who sent the SMS command] and the USER LIST will receive the

following message indicating that a parameter has been modified:

Location: {location of telephone} this can be configured via SMS

Type:

New PIN set

Battery: [Battery_voltage] current battery voltage e.g. 11.95V accurate to approx. 37mV

Signal: [GSM Signal_level] Range is 0-31 (0 unregistered, 31 max strength)

Last Call: [Duration of last call if over 10 seconds]

Ver: <Firmware _Version> Factory preset.

Status request command [REQ]

In order to clarify telephone status a request can be made to establish system parameters and

health status. Upon receipt the telephone replies with a USERTEXT message to the command

originator:

REQ1234

The originator [the person who sent the SMS command] and the USER LIST will receive the

following message indicating that a parameter has been modified:

Location: {location of telephone} this can be configured via SMS

Type:

Request

Battery: [Battery_voltage] current battery voltage e.g. 11.95V accurate to approx. 37mV Signal:

[GSM Signal_level] Range is 0-31 (0 unregistered, 31 max strength)

Last Call: [Duration of last call if over 10 seconds]

Ver: <Firmware _Version> Factory preset.