DAC Limited 711 Series Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Telefone DAC Limited 711 Series. DAC Limited 711 Series 6 páginas. Vandal resistant full keypad telephones
Também para DAC Limited 711 Series: Manual do utilizador (12 páginas)
Imprimir página*1*nn
Where nn represents the PIN/command
mode timeout value 01-99 seconds (10
seconds default)
*2*nn
Where nn represents the voltage free
contact energise time value 01-99 seconds
(2 seconds default)
*3*xxxxyyyy
Where xxxx is the current PIN and
yyyy is the new PIN (xxxx = 1234 default)
*4*n
Where n represents the PIN entry mode
loudspeaker mute status 0 - disabled or 1 -
enabled (1 default)
Example: * 1 * 1 5 = PIN/command timeout set to 15
seconds
Example: * 3 * 1 2 3 4 9 4 2 6 = PIN set to 9426 from
default
ELECTRICAL INSTALLATION
Line Terminal Connections and Selections
When populated, the Terminal block mounted at the back of the
unit is labelled as follows:-
1.
Load
2.
Load
Connect the load (0 Volts) to the terminal block marked 1 and
2.
This is the output from the relay which is energised upon pin
entry.
Page 9
Approved Facilities
This telephone is designed to operate via a standard
analogue telephone PBX or exchange. Any other usage will
invalidate the approval of the apparatus and as a result it
then ceases to comply with the standards against which
approval was granted.
Connection is affected by plugging in to an appropriate line
connection via the LINE connection terminal as described in
the section marked ELECTRICAL INSTALLATION. If in any
doubt please contact your telephone installer or network
supplier.
It is assumed that this equipment will be installed by a
qualified telephone installer, incorrect installation will
invalidate any warranty. If you are in any doubt regarding
network connectivity or operation please contact your
supplier or network manager. Correct installation and
connection of this apparatus is mandatory as failure to
install and connect correctly will invalidate any approval
given to this apparatus.
Technical assistance, if necessary, is availble from DAC
direct by telephoning +44 (0) 1282 447000.
Page 2