DoorKing 8054-082 Manual - Página 3
Procurar online ou descarregar pdf Manual para Recetor DoorKing 8054-082. DoorKing 8054-082 4 páginas. High security encrypted “rotating code” rf receiver
Imprimir página
Programming Continued
Relay Strike Time:
The amount of time the receiver relay activates.
1. Press
and the four-digit Master Code.
0
3
2. Enter a two-digit number (01-99) for the relay activation in seconds, then press
3. Press
TOGETHER to end programming or wait 20 seconds.
0
Program Current Time and Day:
1. Press
and the four-digit Master Code.
3
3
2. Enter a four-digit current hour and minute (time example - 7:43 - 0743), then press
3. Enter
for AM or
for PM, then press
0
1
4. Enter a two-digit current month (01 - 12), then press
5. Enter a two-digit current day of the month (01 - 31), then press
6. Enter the last two-digits of the current year, then press
7. Enter a single-digit day of the week (1 = Sunday, 2 = Monday, 3 = Tuesday...... 7 = Saturday), then press
8. Press
TOGETHER to end programming or wait 20 seconds.
0
Programming Time Zones:
1. Press
and the four-digit Master Code.
3
8
2. Enter a single-digit time zone to be programmed (ONLY 2 - 9 time zones are valid), then press
3. Enter the Beginning time using four-digits for the hours and minutes (time example - 9:45 - 0945), then press
4. Enter
for AM or
for PM, then press
0
1
5. Enter the Ending time using four-digits for the hours and minutes (time example - 5:00 - 0500), then press
6. Enter
for AM or
for PM, then press
0
1
7. Enter a seven-digit number for the days of the week that the time zone is active, then press
Use the
key to skip days that are not active (1 = Sunday, 2 = Monday, 3 = Tuesday...... 7 = Saturday).
Example 1: If the time zone is active Monday - Friday only, then enter
Example 2: If the time zone is active Monday, Wednesday and Friday only, then enter
8. Repeat steps 2 - 7 to program additional time zones or press
to end the programming. A
"BEEP"
Current hour and minute, AM or PM, current month, current day and current year.
"BEEP"
"BEEP"
Can be used for Step 6 of "Add a Transmitter" on the previous page.
"BEEP"
"BEEP"
"BEEP"
"BEEEEEEEEEP"
will be heard when finished.
"BEEP"
"BEEEEEEEEEP"
"BEEP"
"BEEP"
"BEEP"
"BEEEEEEEEEP"
2
3
at the same time or simply wait 20 seconds
0
"BEEP"
"BEEP"
"BEEP"
"BEEP"
"BEEP"
"BEEP"
4
5
6
2
4
6
Inglewood, California 90301
120 S. Glasgow Avenue
U.S.A.