DoorKing 8059 RF Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Recetor DoorKing 8059 RF. DoorKing 8059 RF 4 páginas. Doorking 8059 rf receiver users guide
Imprimir página26 bit Wiegand Programming
Press and hold the receiver programming button and follow the flashing LED sequence as shown.
1
2
for approxamately 4 seconds and release. The programming LED will come on for (3) three seconds indicating that
the receiver is in 26-bit Wiegand output mode.
31 bit Wiegand Programming
Press and hold the receiver programming button and follow the flashing LED sequence as shown.
1
2
3
for approxamately 6 seconds and release. The programming LED will come on for (3) three seconds indicating that
the receiver is in the 31-bit Wiegand output mode.
Facility Code Match Programming
Press and hold the receiver programming button and follow the flashing LED sequence as shown.
1
2
3
for approxamately 10 seconds and release. The programming LED will come on for three (3) seconds indicating
that the receiver will check the facility code for a match before outputting the transmitter code.
No Facility Code Match Programming
Press and hold the receiver programming button and follow the flashing LED sequence as shown.
1
2
3
for approxamately 12 seconds and release. The programming LED will come on for three (3) seconds indicating
that the receiver will ignore facility codes.
Memory Erase
When the memory is full, a long flash will activate when trying to program a new transmitter. To erase the memory
press and hold the receiver programming button and follow the flashing LED sequence as shown.
1
2
3
This will erase all regular and master transmitters.
Designed by DKS, DoorKing in California
120 Glasgow Avenue, Inglewood, Ca. 90301, 310.641.1589
4
4
4
4
4
4
4
5
4
5
4
6
DKS DoorKing, Inc
8059-065-D-07-07