Astralpool S10 Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Aspirador de piscinas Astralpool S10. Astralpool S10 12 páginas.

s10 pool cleaner

2. AD Flow Valve

The AD Flow valve works by regulating the flow through the pool cleaner to the pump. As

the filter collects debris, the valve will automatically maintain the correct flow.

The installation of the AD Flow valve will depend upon the type of skimmer box and Vac

plate you have. It is either installed straight in from the top of the Vac plate or from the

bottom of the Vac plate.

See the 4 different cases below.

1st case: with WaterCo

Screw in the AD Flow valve connector into the top of the Vac plate.

Screw in all the way then back off one full turn.

2nd case: with Poolrite

Screw in the AD Flow valve connector into the bottom of the Vac plate.

Screw in all the way then back off one full turn.

3rd case: with Speed Regulator/Skimtrol

Simply connect the 90 Degree Elbow into the top of the Vac Plate (use a weir cuff, if

necessary).

90° Elbow

Universal

Weir Cuff

4th case: with any other type of Skimmer Box and Vac plate

Simply insert the AD Flow valve directly into the universal weir cuff which will then fit into

the top of the Vac plate.

AD Flow Valve

NOTE: The AD Flow valve has three settings: High (3), Medium (2) and Low (1). To deliver

the maximum pool cleaning efficiency, the AD Flow valve comes preset at a factory

setting of 2. You will need to adjust the AD Flow valve when and if a problem

occurs.

Installation Manual

Skimmer Box/Vac Plate

Vac Plate

Speed

Regulator

Universal

Weir Cuff