Astrapool Dual Pure 40 Manual - Página 12

Procurar online ou descarregar pdf Manual para Equipamento de iluminação Astrapool Dual Pure 40. Astrapool Dual Pure 40 20 páginas. Salt electrolysis and ph regulation

Imprimir página

ADJUSTING THE DURATION OF THE POLARITY INVERSION

Your salt chlorinator was programmed in the factory for a polarity change every 4 hours.

According to the hardness of the water (TH for degree of Total Hardness), it is possible to change this

cycle from 1 to 99 hours.

Switch off the device

Press

and

Keep

and

Press Menu, DUR appears.

Press Menu, the duration of the polarity inversion is displayed; press

value.

Press Menu to confirm

SELF TEST:

Warning! Water temperature > 23°C, minimum salt content 4g/l.

This function allows one to check the state of the electrode and that the unit is working properly.

Press the "TEST" key.

The LEDs light up,

Then "prod 1" followed by "prod2".

If all of the LEDs flicker after 30 seconds, then the test is OK.

CHECKS AND MAINTENANCE

CHECK THE PARAMETERS:

Press "MENU" for two seconds,

Scroll through the functions using

Then press "Menu" to visualise:

DUR duration of the polarity inversion (self-cleaning expressed in hours).

Factory setting: 4

FE: regulates production according to the position of the cover.

Percentage of production depends on the cover being in the closed position.

Factory setting: 50%

INT: intensity sent to the electrode (expressed in amperes).

simultaneously while switching on the device.

pressed until the screen displays ATT then PRO.

Número de revisión

ENGLISH

to change the

Rev 001-2013-08-06