Astrapool Viron Manual de instruções de instalação e funcionamento - Página 5
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Controlador Astrapool Viron. Astrapool Viron 20 páginas. Connect pool and spa controller
Imprimir página
INITIAL SET UP
When the Viron Connect Pool & Spa Control system is first connected, the installation process must be completed.
Important: The Viron Connect system allows you to name each channel. It is recommended you use the page at
the rear of this manual to list what equipment is plugged into which outlet of the Power/Equipment or Connect 8
Expansion module located at the pool filtration plant. This will enable you to accurately name each outlet when it
comes time to name each channel.
Once the installation of the system has been complete by a licensed person, you will need to complete the
following process;
1. From the main menu, select the SETUP icon
2. Select Set Time
a. Using the up and down arrows, set the clock
b. Select DONE once clock setting is complete
3.
Scroll through menu and select Installation Setup
Key in password 1234 and select done
a. Select CHANGE icon
b. LIGHTING ZONES
i. Select the number of lighting zones (up to 4). This can include lights in the pool or garden
ii.
iii.
c. NO. OF CHANNELS IN SYSTEM
i.
ii.
d. IS A GENUS HEATER INSTALLED
i.
ii.
iii.
Inst 276 - Viron Connect Pool & Spa Controller V0610
lighting (if connected). Any light that has its own power source should be counted as a
separate zone.
Select NEXT
If lighting zones have been selected, you will need to configure them with names and also
if they support multi-colour lighting. This option applies to AstralPool Delta LED lights
connected to a Delta1 or Delta2 controller. For all other lights, do not mark this box
Select the number of channels the system is running. For a standard Viron connect
system, select 4 channels. For systems also containing a Viron Connect 8 expansion unit,
select 8.
Select NEXT
If you have an AstralPool Viron series pool and spa heater on the system, select the YES
option. Otherwise, select
(If no heater is to be used, an optional Viron Connect Temperature Sensor kit can
be ordered and installed)
Select NEXT
NO.
active.
5