Astrel MICROSPA Manual de instalação e do utilizador - Página 2
Procurar online ou descarregar pdf Manual de instalação e do utilizador para Controlador Astrel MICROSPA. Astrel MICROSPA 7 páginas.
Imprimir página1. General warnings
Before installing or operating on the appliance, carefully read and follow the instructions contained in this
manual. The information on installation refers to the electrical connections. No information is provided on the
mechanical or plumbing fittings for connecting the MSPA controller to the minipool.
This manual is an integral part of the product and therefore must be kept for future reference.
Astrel S.p.A. reserves the right to make any modifications it considers necessary without prior warning or
replacement.
2. Responsibility of the user
The device described in this manual has been manufactured to operate risk-free and for the specific purpose,
as long as:
•
the device is installed, programmed, operated and serviced according to the instructions in this manual;
•
the environmental conditions and the power supply are within the specified limits.
All other uses and modifications made to the device that are not authorised by the manufacturer are considered
incorrect.
Liability for injury or damage caused by the incorrect use of the device lies exclusively with the user.
In the event of faults or malfunctions of the product under warranty, contact authorised technical personnel only.
The manufacturer is not liable for any damage caused by products that have been tampered with or repaired
incorrectly.
3. Accessing the live parts
This device contains live electrical components. Consequently, all the service and maintenance operations must
be performed by expert and qualified personnel, after having taken the necessary precautions.
As the MICROSPA controller does not feature any internal systems for disconnecting the power supply,
the power line must be fitted with disconnecting and protection devices compliant with the standards in
force in the country of installation.
Before accessing the inside parts, the unit must be disconnected from the mains power supply using a
disconnecting switch.
4. Precautions when handling the board
To avoid damage of an electrostatic nature to the board, the following precautions must be adopted.
•
Before handling the controller, the board or any electronic component, touch an earthed object so as to
discharge the electrostatic charges present on the body and on the clothing.
•
The materials must remain as long as possible inside their original packages; when having to remove the
board from the antistatic packaging, touch it as little as possible.
•
Never use plastic, polystyrene or non-antistatic sponge bags for packaging the board.
•
Never pass the unpackaged boards, as described previously, between operators (to avoid electrostatic
induction and consequent discharges).
D:\LAVORO\CONTROLLI SPAS\MANUALI INSTALLAZIONE\MICROSPA\Instruction Microspa.doc
Astrel S.p.A.
Via Isonzo, 21/E – 34070 Mossa (GO) Italy
Tel. (+39) 0481 637301 r.a.-Fax (+39) 0481 637362
e-mail: [email protected] – www.astrel.it
Cap. Soc. € 619200. i.v.
Tribunale di Gorizia n. 3505
R.E.A. n. 049936 – M/351122
Part. IVA e Cod. Fisc. 00187070313
Sheet 2/7