AMES 64016 Manual do Proprietário - Página 12

Procurar online ou descarregar pdf Manual do Proprietário para Instrumentos de medição AMES 64016. AMES 64016 16 páginas. 200a ac fork meter

Imprimir página
continuity Measurement
Test continuity between two
points of a circuit.
WARNING! To prevent electric
shock, disconnect all power to
circuit and discharge all high-voltage
capacitors before measuring.
1.
Plug black Test Lead into
black cOM Jack.
Plug red Test Lead into red Input Jack.
2.
Turn Rotary Switch to
capacitance Measurement
Measure capacitance up to 60mF.
WARNING! To prevent electric
shock, disconnect all power to
circuit and discharge all high-voltage
capacitors before measuring.
Note: It may take up to 30 seconds
for reading to stabilize.
1.
Plug black Test Lead into
black cOM Jack.
Plug red Test Lead into red Input Jack.
2.
Turn Rotary Switch to
Diode Measurement
Test voltage drop in diodes.
WARNING! To prevent electric
shock, disconnect all power to
circuit and discharge all high-voltage
capacitors before measuring.
1.
Plug black Test Lead into
black cOM Jack.
Plug red Test Lead into red Input Jack.
2.
Turn Rotary Switch to
Page 12
position.
position.
position.
For technical questions, please call 1-888-866-5797.
3.
Press FUNc button until
is displayed.
4.
Short Test Leads together, meter
should beep continuously.
5.
Connect Test Leads to two points of
circuit. If resistance value is less than
50Ω, Meter will beep continuously.
6.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
3.
Press FUNc button until n F appears.
4.
Carefully touch capacitor
leads with tips of probes.
5.
Read measurement.
Note: If capacitor is short
circuited or capacitance is too
high, display will read OL.
6.
When testing is complete, turn
Rotary Switch to OFF, remove
and store capacitor and Meter.
3.
Press FUNc Button until
is displayed.
4.
Connect red probe to diode's anode
and black probe to its cathode.
5.
Approximate forward voltage drop
of diode will be displayed in mV.
Note: If circuit is open or diode polarity
is reversed, display will read OL.
6.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
Item 64016