Ames Instruments DM1000 Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Instrumentos de medição Ames Instruments DM1000. Ames Instruments DM1000 16 páginas. Electrician/hvac trms digital multimeter
Imprimir página
Operating Instructions
Read the ENTIRE IMpORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Electrical shock can cause death or injury! NEVER TOUCH
exposed conductors of
General Operating Instructions
REL
1.
Press the REL button once to
enter relative measurement mode
and store a reference value.
2.
Take additional measurements to
display difference between measured
value and reference value.
Manual Range
The Meter's default range is AUTO in voltage, current, resistance, and
capacitance modes. To select manual range, press RANGE. Each press of the
button increases the range. Hold the RANGE button to return to auto-range.
Maximum and Minimum Value Measurements
1.
Press the MAX MIN button one
time to measure the maximum
value at any range.
2.
Press the MAX MIN button
two times to measure the
minimum value at any range.
3.
Read measured minimum or maximum
value at the top right of the Display.
Page 8
electricity.
For technical questions, please call 1-888-866-5797.
3.
Press REL button a second time to
return to normal measuring mode.
Note: Relative measurement mode can
only be used in manual range mode.
Note: Relative measurement mode
cannot be used in Hz% mode.
4.
Hold the MAX MIN button
for one or more seconds to
return to normal mode.
Note: The Meter is automatically set to
manual range mode when measuring
minimum or maximum value.
Note: Minimum and maximum value mode
cannot be used while in Hz% mode.
Item 64019