Flycam FLCM-DN-ABQ Manual de montagem - Página 3
Procurar online ou descarregar pdf Manual de montagem para Acessórios para vídeo profissional Flycam FLCM-DN-ABQ. Flycam FLCM-DN-ABQ 12 páginas. Dslr nano handheld camera stabilizer brace support
Imprimir páginaHandheld Steadycam with Base Platform Setup
•
Remove the cap from the middle of the base
platform, and you will see 1/4 thread located
in the center, as shown in the image.
•
Attach the extended part of the post via
threaded insert at the bottom to the 1/4
screw present on the expandable base
platform.
•
Remove the bolts on either side of the head
platform. Mount the head plate to the center
post.
•
Insert both the bolts by matching the threads
of the plate to the center post, and then
tighten them using the Allen key.
•
Loosen the side knob and then position it
according to your requirement by sliding it.
The slots located on the Head Plate and the Bottom Plate allows you to easily adjust X & Y Axis for perfect
balance. Place the assembly in line with center of stabilizer post and tighten the side adjusters, as shown.
Head Plate X adjustment
Head Plate Y adjustment
3