Cognisys STACKSHOT 3X Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Controlo remoto Cognisys STACKSHOT 3X. Cognisys STACKSHOT 3X 16 páginas.

Confirm that your StackShot 3X is set up as an "Access Point":

If you do not see "Wireless mode: Access point", then simply press that button to switch the

controller to an access point.

Press the down arrow until you see "Remote Pairing: Enable". Press this button:

The button will then show "Remote Pairing: Active".

Now turn on your remote (Press and release the "B" button). You will see the blue LED on your

remote slowly ramp up and down as it looks for your StackShot 3X controller. Once the Remote

finds it, the blue LED will turn solid on. That concludes the pairing process!

Note: The remote can be paired to only one StackShot 3X at a time.

If you wish to re-pair the remote with a new StackShot 3X controller you will have to erase the

previous pairing. To do this start with the remote turned off. Press and hold the "B" (power)

button until the blue LED goes out. Release the "B" button. The Remote will now start looking

for a StackShot 3X with pairing mode enabled.