Akw T301 Instruções de instalação, de manutenção e de utilização - Página 4

Procurar online ou descarregar pdf Instruções de instalação, de manutenção e de utilização para Produto de canalização Akw T301. Akw T301 16 páginas. Basin mixer valve

Imprimir página
Components
151.5 mm
51 mm
141.5 mm
Rubber Washer (44mm od)
Rubber Washer (47mm od)
115 mm
Horse Shoe Washer
15mm compression fitting
465 mm
adaptor
Fixing Bolts
Flexible inlet tails
Fixing Nuts
Connections:
The hot and cold inlet supply connections are via the 15mm compression fitting
adaptor or the 1/2" BSP fittings on the check valve and filter assemblies. These are
connected to the ends of flexible inlet tails.
The 15mm compression fitting adaptor allows connection to either flat-faced 1/2"
BSP external or 15mm compression union. The hot supply connection is through
the flexible inlet tail nearest the spout of the T301 tap, identified with a red mark.
Note: Isolation valves must be fitted adjacent to the inlets.
We recommend that independant filters, isolation and check valves are fitted in an
accessible location (not supplied).
For optimum performance hot and cold water inlet pressures should be balanced.
Ensure the pressure is within the conditions of normmal use.
4