Flyduino KISS 32A ESC Manual - Página 2

Procurar online ou descarregar pdf Manual para Motor Flyduino KISS 32A ESC. Flyduino KISS 32A ESC 9 páginas.

Safety Warnings

• Due to the regenerative braking, the KISS ESC should only be powered by LiPo batteries.

A power supply might get damage when braking. The ESC takes care of itself.

• Never start a brushless motor in your hands!

• While starting up with propellers mounted, always do it in a distance of yourself & objects

• The KISS ESC can be locally heated up to 80 ° C during operation!

• While soldering do not connect a voltage source at the ESC / speed controller.

• Some components on the KISS ESC can be destroyed by static charge. When handeling such

electronics, make sure to be grounded.

Description/Components

1. Solder contacts for motor-phase connections

2. LiPo Power supply GND -

3. LiPo Power supply +

4. PWM/Dshot signal input (servo signal)

5. PWM/Dshot signal GND (ground reference)

6. Solder jumper to set the direction of rotation (also in 3D mode)

7. Telemetry (e.g. On the KISS FC connected to TRX/TLM)

8. Status LED (indicates validity of the input signal)