Acer AcerSystem Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Ambiente de trabalho Acer AcerSystem. Acer AcerSystem 16 páginas. Acer aspire z3761 21.5 pw.sh0e2.011
Também para Acer AcerSystem: Manual do utilizador (32 páginas), Manual do utilizador (27 páginas), Manual do utilizador (41 páginas), Manual do utilizador (17 páginas), Manual do utilizador (27 páginas), Manual do utilizador (30 páginas), Manual do utilizador (36 páginas), Manual do utilizador (30 páginas), Manual do utilizador (41 páginas), Manual do utilizador (28 páginas), Manual do utilizador (32 páginas), (Inglês) Manual do utilizador (43 páginas), (Portuguese) Manual Do Utilizador (41 páginas)

Connecting to the network

You can connect your computer to a Local Area Network (LAN) using a network cable. To do

so, simply plug the network cable into the network port

computer.

Note: Consult your network system administrator or operating system manual for information

on how to configure your

network setup.

After connecting the necessary peripherals and plugging in the power cable, you are now

ready to turn the computer on and get to work.

To turn on your computer:

Turn on all peripherals connected to your computer, such as the monitor, printer,

speakers, etc.

On the front panel of your computer, press the Power button.

Important: Make sure that the power cable is properly plugged into an electrical

outlet. If you are using a power strip or an AVR (Auto-Voltage Regulator), make

sure that it is plugged in and turned on.

To turn off your computer, follow the steps below.

For Windows XP/Vista:

On the Windows XP/Vista taskbar, click on the Start button, and click Turn Off Computer,

then click Turn Off.

Turn off all peripherals connected to your computer.

If you cannot shut down your computer normally, press and hold the power button for at least

four seconds. Quickly pressing the button may put the computer in suspend mode only.

on the rear panel of your