Canon 3080CII - DR - Document Scanner Manual de início fácil

Procurar online ou descarregar pdf Manual de início fácil para Scanner Canon 3080CII - DR - Document Scanner. Canon 3080CII - DR - Document Scanner 2 páginas.

Document Scanner DR-3080CII
Easy Start Guide
Thank you for purchasing the Canon DR-3080CII Document Scanner.
This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the
procedures outlined in this Easy Start Guide to set up the scanner. Details on using the
scanner are described in the User's Guide packaged with the scanner. Before you start using
the scanner, make sure to thoroughly read the User's Guide.

Checking the Package Contents

When you unpack your scanner, make sure all of the following accessories are included.
If any of the items listed below are missing or damaged, contact your local authorized Canon
dealer or service representative.
Power Cord
DR-3080CII Scanner
Easy Start Guide
Document Eject Guide
Auxiliary Paper
Support Plate
(This Manual)
The DR-3080CII Setup Disc is
inserted in the User's Guide.
DR-3080CII
Quick Reference Guide
Setup Disc
0880281099-L5T1P7-BR01
6 3 9 0
C A N O N
D I X I E
C A N A D A
R D
I N C .
M I S S I S S A U G A
O N
L 5 T
9 Z 9
Registration Card
Warranty Card
(U.S.A and Canada only)
(U.S.A and Canada only)
Note
The DR-3080CII Setup Disc contains the Softwares (DR-3080CII Scanner Driver
and CapturePerfect3.0) and PDF manuals. For details, refer to "About the Setup
Disc" on page 16 of the User's Guide.
Items included in this package are subject to change without notice.
Keep the package and packing materials for storing or transporting the scanner.
After checking the package contents, you need to remove all the
packing materials protecting the scanner. (
Removing the Packing Materials
After unpacking the scanner, perform the following steps to remove all the orange
tape and protective materials from it.
1.
Peel off all the orange tape from the outer casing.
2.
Carefully open the document feed tray.
Document Feed Tray
Trademarks
• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or
registered trademarks in other countries.
• Microsoft Windows
®
is a registered trademark of Microsoft USA in the United States and other countries.
• Other brands and product names used in this manual may be trademarks or registered trademarks of their respective
companies.
PUB. CE-IE-519
©2006 CANON ELECTRONICS INC.
3 .
Peel off the orange tape from all the places marked
4 .
Peel off the orange tape indicated by the
unit.
Upper Unit
5.
Remove the protective sheet.
USB Cable
User's Guide
6.
Gently close the upper unit. Make sure the upper unit is closed securely by
pressing down on it until you hear it click into place.
Adobe Acrobat
Setup Disc
Shading Sheet
The scanner is now ready for use.
Next, you need to install the scanner software. (
Install the software before connecting the scanner to the computer.
Warning
STEP2)
Do not connect the scanner to the computer before installing the software.
In a Windows 98SE/Me/2000/XP environment, if you connect the scanner and
turn it ON before you install the software, a wizard screen will appear.
If this wizard appears, click [Cancel] to exit the wizard, and then turn the
scanner OFF.
Wizard Screen (Windows 2000)
Close all other applications before installing the software.
1.
Log on to Windows.
Be sure to log on with Administrator privileges
when logging on to Windows NT/2000/XP.
2.
Insert the DR-3080CII Setup Disc into the
computer's CD-ROM drive.
The setup wizard automatically starts up when
you insert the CD-ROM into the CD-ROM
drive. If the setup wizard does not start up, run
the setup.exe application on the CD-ROM.
below.
mark, and carefully open the upper
STEP3)

Installing the Software

3.
Click [Typical Installation].
[Typical Installation] installs all of the software.
If you want to select which parts of the
software to install, click [Custom Installation].
4.
Click [Install].
All of the currently displayed software is
installed. To install only selected software,
click [Back] and select [Custom Installation].
5.
Click [Next].
6.
Read the software license agreement, and click
[Yes] if you consent to its conditions.
Installation of the scanner driver starts.
7.
Click [Finish] to complete the installation.
Next, the installation wizard for CapturePerfect
3.0 appears.
8.
Click [Next].
9.
Read the software license agreement, and click
[Yes] if you consent to its conditions.
10.
Check the destination folder for the installation,
and click [Next].
Installation of CapturePerfect 3.0 starts.
11.
Click [Finish] to complete the installation of
CapturePerfect 3.0.
12.
When all installations are complete, the
installation completed screen appears.
Click [Exit] to exit the installer. Click [Back] to
return to the menu screen.
This completes the software installation.
Next, you need to connect the scanner to your computer. (
STEP4)
Continued on back side