Doran 2200 Series Manual do operador - Página 14

Procurar online ou descarregar pdf Manual do operador para Balanças Doran 2200 Series. Doran 2200 Series 15 páginas.

Keypad Entry of ID Values

Press ID to enter the ID edit mode. The last viewed or edited ID will be displayed. The

display will show Id, followed by the current ID's value. Press UNITS or PRINT to scroll

to the desired ID. The annunciators below the main display indicate which ID is

currently displayed.

Enter up to six digits through the numeric keypad. Press ENTER to accept the change

and return to the weigh mode or press UNITS or PRINT to save and edit other IDs. To

exit the ID edit mode press ID.

The display will read abort to indicate no changes were made to the preact values or

the display will read Saved to indicate the preact value is saved.

Two ways to enter ID values into scale. Up to 20 alphanumeric characters can be read

into each of the eight available ID's.

1. Press ID to enter the ID edit mode. The last viewed or edited ID will be displayed.

The display will show Id, followed by the current ID's value. Press UNITS or PRINT

to scroll to the desired ID. The annunciators below the main display indicate which

ID is currently displayed.

Using Doran's optional barcode scanner, scan the desired barcode. The display will

read ------ to represent the barcode value. To exit the ID edit mode press ID.

2. When the scale is in the normal weighing operation. Use the Doran's optional

barcode scanner to scan in a bar code value that begins with a numeric character.

The bar code value does not require a prefaced command to be saved as a value for

ID 1.

Press and hold the decimal point button on the keypad until date is displayed. The

current date flashes on the display. To toggle between the current time and date, press

the decimal point button. When time is displayed tinne is shown on the display.

To change the date, display the date and enter the date, followed by the time and year.

Press UNITS and PRINT to change the current selection. The field that is being edited

flashes on the display. Enter a leading zero when entering a single digit year, month or

day. Press UNITS until the display reads saved to confirm the date changes are saved.

To change the time, display the current time and enter the time in 24 hour format. Press

UNITS and PRINT to change the current selection. The field that is being edited flashes

on the display. Enter a leading zero when entering a single digit hour, minute or second.

Press UNITS until the display reads saved to confirm the date changes are saved.