Astro Pneumatic 6330 Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Luz de trabalho Astro Pneumatic 6330. Astro Pneumatic 6330 4 páginas. Rechargeable 60 led work light
Imprimir páginaUnpacking
When unpacking, check the parts diagram and part number listing
on page 4 to make sure all parts are included. If any parts are
missing or damage, please call your distributor.
WARNING
Use 6330CH Charger only with 6330 LED Light
• For safe operation always read, follow, and
understand instructions in the manual provided.
• The 6330CH charger is designed specifically for
the 6330 light thus DO NOT attempt to charge
any other product because personal injury or
property damage may result.
• Do not expose to liquids including, but not
limited to, water, rain, snow, etc.
• Before charging light, assure that the charger
base is free of any foreign objects. Foreign
objects made of conductive materials can cause
an electrical short circuit.
• Risk of electric shock of 120V AC at terminal
charger is present. Do not probe terminals.
• If any part of the unit, light, charger or cord,
is damaged, do not attempt to charge;
replace immediately.
• Do not use an extension cord
with the battery charger.
• To avoid accidental tripping and/or damage to
cord, make sure that the cord is located in an
area where it will not be walked over.
• Do not pull cord to unplug, pull on plug.
RECHARGEABLE 60 LED WORK LIGHT
6330
MADE IN CHINA
Page 2
RECHARGEABLE 60 LED WORK LIGHT
INSTRUCTIONS:
• The battery must be charged 6 to 8 hours before
using the first time to insure proper operation.
• There are 60 LED elements on the light.
• Under normal usage the light will remain illuminated
for approximately 3 hours after a 6 hour battery charge.
• When the battery indicator light is flickering in red light,
the battery needs to be recharged.
• When the battery is fully charged,
the battery indicator light will turn green.
• Before storing the light for a prolonged period of time,
be sure to fully charge the battery.
• Store the light in a dry clean area with the temperature
between 32°F (0°C ) and 104°F (40°C).
• DO NOT submerge in water.
• DO NOT use solvents to clean any part of the light.
Clean with a damp cloth and mild detergent.
• Intelligent Charger - Prevents battery overload
and burn-out
• Easy Battery Replacement System
• 60 super bright LED 12000 MCD
• Single charge provides up to 3 hours of
continuous use
• High light output with low energy consumption
• Minimal heat generated
• Unit uses 900 mAh replaceable Ni-MH batteries
• Designed with complete discharge protection
with indicator light
• UL listed 120V (100-240V) AC 50/60Hz, 12V DC
400mAh main charger included
• Removable battery pack provides
simple replacement
• Recessed charging jack and on/off switch
provides protection from damage
caused by dropping
• CE listed