Astro-Gadget EQStarPro Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Telescópio Astro-Gadget EQStarPro. Astro-Gadget EQStarPro 17 páginas.

EQStarPro User Guide

4.3. Guiding using the ST-4 port

The ST-4 port on the EQStarPro can also be used with an external guider like the Skywatcher

standalone SynScan guider.

To get the EQStarPro to accept guiding via the ST-4 port, connect the joystick remote and press and

hold the mode button (side of joystick box) for 5 seconds. EQStarPro will respond with a long beep.

The default guiding speed for each axis is x0.5. Pressing the RA + button up to three times will result

in x0.5, x0.75 and x1.0 speeds. Similarly, 'DEC +' button presses change the DEC guide speed from

x0.5 to x0.75 to x1.0. The EQStarPro will respond with appropriate beeps as these changes are

made.

Now disconnect the joystick and connect the autonomous guider to the ST-4 port.

To deactivate the ST-4 guiding mode, press and hold the joystick 'mode' button again for 5 seconds.