Canon 5178B002 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Lente de câmara Canon 5178B002. Canon 5178B002 2 páginas. Ef lenses

Imprimir página

4. Image Stabilizer

You can use the Image Stabilizer in AF or MF mode.

This function provides optimal image stabilization depending on

shooting conditions (such as shooting still subjects and following shots).

1. Set the STABILIZER switch to ON ❺ .

●

If you are not going to use the image stabilizer function, set the

switch to OFF.

2. When you press the shutter button halfway, the Image Stabilizer will

start operating.

●

Make sure the image in the viewfinder is stable, then press the shutter

button the rest of the way down to take the picture.

●

The Image Stabilizer cannot compensate for a blurred shot

caused by a subject that moved.

●

The Image Stabilizer may not be fully effective if you shoot from

a violently shaking vehicle or other transportation.

●

The Image Stabilizer consumes more power than normal

shooting, so fewer shots can be taken if you use the function.

●

When shooting a still subject, it compensates for camera shake

in all directions.

●

It compensates for vertical camera shake during following

shots in a horizontal direction, and compensates for horizontal

camera shake during following shots in a vertical direction.

●

When you use a tripod, the Image Stabilizer should be turned

off to save battery power.

●

The stabilizer is equally effective for handheld photography and

photography with a monopod. The Image Stabilizer effect may

be reduced, however, depending on the shooting environment.

●

The Image Stabilizer also operates when the lens is used with

extension tube EF12 II or EF25 II.

●

If you set the camera's Custom Function to change the

assigned button to operate the AF, the Image Stabilizer will

operate when you press the newly assigned AF button.

5. Hood (Sold Separately)

The EW-72 hood can keep unwanted light out of the lens, and also

protects the lens from rain, snow, and dust.

To attach the hood, align the hood's attachment position mark with the

red dot on the front of the lens, then turn the hood in the direction of

the arrow until the lens's red dot is aligned with the hood's stop position

mark ❻ .

To remove the hood, hold down the button on the side and turn the hood

in the direction of the arrow until the position mark on the hood aligns

with the red dot ❼ .

The hood can be reverse-mounted on the lens for storage.

Specifications

Angle of view

Diagonal

Vertical Horizontal

EF35mm f/2 IS USM

63°

CT1-8586-000

Lens

Minimum

construction

aperture

38°

54°

8-10

1206SZ

●

Part of the picture may be blocked if the hood is not attached properly.

●

When attaching or detaching the hood, grasp the base of the hood to

turn it. To prevent deformation, do not grasp the rim of the hood to turn it.

6. Filters (Sold Separately)

You can attach filters to the filter mounting thread on the front of the lens.

●

Only one filter may be attached.

●

Use a polarizing Canon filter (67mm).

●

To adjust the polarizing filter, first remove the lens hood.

7. Extension Tubes (Sold Separately)

You can attach extension tube EF12 II or EF25 II for magnified shots.

For shooting distance and magnification, see the extension tube

specifications.

MF mode is recommended for accurate focusing.

●

T he extenders cannot be used with this lens.

●

T he close-up lenses cannot be used with this lens.

●

C ASE (Sold Separately) LP1116

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise

specified in the instructions. If such changes or modifications should be made, you

could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Extension Tube Specifications

(Sold Separately)

EF35mm f/2 IS USM

Max.

Min. focusing

magnification

distance

diameter

0.24x

0.24m/0.79ft

67mm

Magnification

(X)

EF12 II

0.60-0.36

EF25 II

1.04-0.79

Filter

Max. diameter and

Weight

length

77.9x62.6mm

335g/11.8oz EW-72

(3.1"x2.5")

❺

●

STABILIZER

OFF

❻

●

❼

●

Button

Focusing Distance Range

(mm) (inch)

168-197 (6.6-7.6)

158-160 (6.2-6.3)

* Sold Separately

Hood* Lens Cap

Case*

E-67ll

LP1116