Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Manual - Página 27

Procurar online ou descarregar pdf Manual para Lente de câmara Canon 540EZ - Speedlite - Hot-shoe clip-on Flash. Canon 540EZ - Speedlite - Hot-shoe clip-on Flash 36 páginas. Camera flash
Também para Canon 540EZ - Speedlite - Hot-shoe clip-on Flash: Livro de instruções (32 páginas), Catálogo de peças (12 páginas), Livro de instruções (37 páginas), Manual do operador (4 páginas), Livro de instruções (32 páginas)

Imprimir página

Canon 540EZ - Speedlite - Hot-shoe clip-on Flash Manual

VI. Canon Speedlite 540EZ System

L 1

$ Multiple Flash Accessories

This accessory lets you separate the flash approximately 60cm / 2ft from the

camera while maintaining all of the EOS automatic flash functions.

This adapter is equipped with two sets of direct-coupled contacts as well as a

connecting cord socket. By mounting this adapter between the camera's acces¬

sory shoe and the flash unit, a connecting cord can be used to add additional

speedlites using the Off-Camera Shoe Adapter or the TTL Distributor.

This adapter is equipped with one set of direct-coupled contacts and a connect¬

ing cord socket. A tripod socket is provided on the base of the adapter to facili¬

tate off-camera mounting. A flash unit attached to the direct-coupled contacts

can be connected to the TTL Hot Shoe Adapter 3 or TTL Distributor via a con¬

necting cord.

This adapter has four connecting cord sockets. By connecting one socket to the

TTL Hot Shoe Adapter 3 and the other three sockets to Off-Camera Shoe

Adapters, multi-flash configurations comprising up to four flash units are possi¬

ble.

® Connecting Cord 60, Connecting Cord 300

These cables are used to connect multiple flash setups and are available in two

lengths: 60cm / 2ft and 300cm / 10ft.

@ External Power Supplies

0 Transistor Pack E with Battery Magazine TP and Connecting Cord E

This external power supply uses six C-size alkaline-manganese batteries, six

C-size Ni-Cd batteries or a dedicated Ni-Cd battery pack. When using C-size

alkaline-manganese or Ni-Cd batteries, the batteries are inserted into the sup¬

plied Battery Magazine TP, which is then loaded into the Transistor Pack E

main unit.

(2) Ni-Cd Pack TP, Ni-Cd Charger TP

The Ni-Cd Pack TP is a dedicated battery pack for use with the Transistor Pack

E which enables quick firing with fast recycle times. The Ni-Cd Charger TP is a

dedicated charger for recharging the Ni-Cd Pack TP which provides a full

charge in approx. 15 hours.

® Compact Battery Pack E

This is a small, lightweight external battery pack that uses six AA-size alkaline-

manganese batteries or six AA-size Ni-Cd batteries.