Canon CN20x50 Series Manual de operação - Página 22

Procurar online ou descarregar pdf Manual de operação para Lente de câmara Canon CN20x50 Series. Canon CN20x50 Series 41 páginas. Information display
Também para Canon CN20x50 Series: Manual de operação (33 páginas), Manual de início rápido (14 páginas)

Imprimir página
Canon CN20x50 Series Manual de operação
5 OPERATION
Framing Preset [Zoom]/[Focus]/[Z+F] Setting
NOTE
The following figure is shown as an example. Actual state of the switch may look different if the function
is allocated to the different switch.
Fr1P function--------Assigned to the AUX switch by factory default.
1. Setting the framing memory position
Zoom Rocker Seesaw
MEMO Switch
2. Moving to the framing memory position
Once the Fr1P switch is pressed, the zoom starts to move toward the framing memory position at the preset speed
and stops at the framing memory position.
3. Canceling the movement to the framing memory position or switching to other zoom operation
Movement to the framing memory position can be canceled by any of the following operations.
[Zoom Framing Preset]
• Press the Fr1P switch again.
• Perform zoom operation with the zoom rocker
seesaw.
• Perform zoom operation with the Shtl switch.
Zoom (and focus) to the position that you want to store, while
holding this zoom (and focus) position, and then press the Fr1P
switch while holding down the MEMO switch.
Fr1P Switch
NOTE
This framing memory position is different from the shuttle
Shtl Switch
memory position.The stored zoom position is retained
even after the power is turned off.
[Zoom, Focus Framing Preset]
E14
• Operate a connected focus demand. Movement to
the memory position stops, and movement to the
operating position of the focus demand takes place.