Canon EF28-105mm f/4-5.6 USM Instruções - Página 2

Procurar online ou descarregar pdf Instruções para Lente de câmara Canon EF28-105mm f/4-5.6 USM. Canon EF28-105mm f/4-5.6 USM 2 páginas. Ef zoom lenses

Imprimir página

5. Hood (sold separately)

The hood can keep unwanted light out of the lens, and also

protects the lens from rain, snow, and dust. Engage the hood

attachment tabs on the lens with the tabs on the hood and

turn the hood in the direction of the arrow to secure it to the

lens

❻

The hood can be reverse-mounted for storage

• To mount the hood on the EF28-105mm f/4-5.6 USM and

EF28-200mm f/3.5-5.6 USM, align the hood's attachment

position mark with the red dot on the front of the lens, then

turn the hood clockwise until the lens's red dot is aligned

with the hood's stop position mark

❽

❾

• Part of the picture may be blocked if the hood is not

attached properly.

Specifications

Angle of view

Diagonal

Vertical

EF22-55mm f/4-5.6 USM

90°-43°

57°-25°

EF28-80mm f/3.5-5.6IV USM

75°-30°

46°-17°

EF28-80mm f/3.5-5.6V USM

75°-30°

46°-17°

EF28-90mm f/4-5.6 USM

75°-27°

46°-15°10'

EF28-90mm f/4-5.6II USM

75°-27°

46°-15°10'

EF28-200mm f/3.5-5.6 USM

75°-12°

46°-7°

EF28-105mm f/4-5.6 USM

75°-23°20'

46°-13°

EF35-80mm f/4-5.6 USM

63°-30°

38°-17°

CT1-7516-006

6. Filter (sold separately)

The filter screws onto the front of the lens.

• Only one filter may be attached.

• If you need a polarizing filter, use Canon's PL-C polarizing

filter.

The lens length is measured from the mount surface to the

❼

front end of the lens. Add 21.5 mm when including the lens

cap and dust cap.

The size and weight listed are for the lens only, except as

indicated.

Product specifications and appearance are subject to

change without notice.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be

required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled

"Digital Apparatus", ICES-003 of the Industry Canada.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques (de la classe B) prescrites dans le Règlement

sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

Lens

Minimum

construction

aperture

Horizontal

22 mm:0.08X/295 × 454 mm (11.6"×17.9")

79°-36°

9-9

22-32

55 mm:0.2X/122 × 181 mm (4.8"×7.1")

28 mm:0.098X/255 × 393 mm (10"×15.5")

65°-25°

10-10

22-38

80 mm:0.257X/91 × 135 mm (3.6"×5.3")

28 mm:0.098X/255 × 393 mm (10"×15.5")

65°-25°

10-10

22-38

80 mm:0.257X/91 × 135 mm (3.6"×5.3")

28 mm:0.10X/245 × 367 mm (9.7"×14.4")

65°-22°40'

8-10

22-32

90 mm:0.30X/81 × 121 mm (3.2"×4.8")

28 mm:0.10X/245 × 367 mm (9.7"×14.4")

65°-22°40'

8-10

22-32

90 mm:0.30X/81 × 121 mm (3.2"×4.8")

28 mm:0.08X/312 × 485 mm (12.3"×19.1")

65°-10°

12-16

22-36

200 mm:0.28X/87 × 130 mm (3.4"×5.1")

28 mm:0.07X/365 × 566 mm (14.4"×22.3")

65°-19°20'

9-10

22-32

105 mm:0.19X/127 × 190 mm (5.0"×7.5")

35 mm:0.116X/212 × 328 mm (8.3"×12.9")

54°-25°

8-8

22-32

80 mm:0.247X/97 × 144 mm (3.8"×5.7")

Min. focusing

Max. magnification and field of view

distance

0.35 m/1.15 ft

0.38 m/1.25 ft

0.45 m/1.5 ft

0.48 m/1.57 ft

0.38 m/1.25 ft

❻

●

❼

●

Filter diameter

Hood

Max. diameter and length

58 mm

EW-60D

66 × 59.4 mm (2.6"×2.3")

58 mm

EW-60C

66.4 × 71.2 mm (2.6"×2.8")

58 mm

EW-60C

66.4 × 71.2 mm (2.6"×2.8")

58 mm

EW-60C

67 × 71 mm (2.6"×2.8")

58 mm

EW-60C

67 × 71 mm (2.6"×2.8")

72 mm

EW-78D

78.4 × 89.6 mm (3.1"×3.5")

58 mm

EW-63B

67 × 68 mm (2.6"×2.7")

52 mm

EW-54

65 × 61 mm (2.6"×2.4")

❽

●

❾

●

Weight

Case

175 g/6.2 oz

LP1014

200 g/7.0 oz

LP814

200 g/7.0 oz

LP814

190 g/6.7 oz

LP814

190 g/6.7 oz

LP814

500 g/17.6 oz

LP1116

210 g/7.4 oz

LP814

170 g/6.0 oz

LP814

2006.9.1