AIR GUARD AG-1600 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Máquina de nevoeiro AIR GUARD AG-1600. AIR GUARD AG-1600 13 páginas.

Fogging Time, and Cycle Duration. Use the ▲ (UP/TIMER) and ▼ (DOWN/VOLUME) buttons to

toggle between the different settings.

*Waiting Time – is the amount of time in between blast and can be set between 00:10 (10 seconds)

and 60:00 (60 minutes) by using ▲ (UP/TIMER) and ▼ (DOWN/VOLUME) buttons. Once a setting

has been made press the STOP button once to confirm and save the setting.

*Fogging Time - is the amount of time the unit will emit fog and can be set between 00:10 (10

seconds) and 60:00 (60 minutes) by using ▲ (UP/TIMER) and ▼ (DOWN/VOLUME) buttons. Once a

setting has been made press the STOP once button to confirm and save the setting.

*Cycle Duration – is the number of times the machine will repeat the above two settings before

stopping and can be set between 1 and 20 times or Continuous by using ▲ (UP/TIMER) and ▼

(DOWN/VOLUME) buttons. Once a setting has been made press the STOP button once to confirm

and save the setting.

Note: If cycle duration is set to "Continuous" the AG-1600 will continue to run the timer settings

until the timer is switched off manually by pressing the STOP button.

Once all settings are made press STOP button again to exit the settings menu and return to the

main menu page (Date/Time page), press ▲ (UP/TIMER) button to trigger Timer mode, and press

STOP button to stop Timer mode.

Together the three different settings provide for an extremely flexible fogging cycle, for example: If

you wish the AG-1600 to fog for 5 minutes every 30 minutes, three times, set the Waiting Time to

30:00 , the Fogging Time to 05:00, and the Cycle Duration to 3.

NOTE: At the end of the last cycle the AG-1600 will automatically go into stand-by mode in three

minutes, shutting down the heater and display to conserve power.

Schedule Mode:

The AG-1600 comes with a built-in clock and calendar that allows the unit to be triggered

automatically at any time. This feature is especially useful when wanting to sanitize a room or space

late at night or any other time when a room is scheduled to be empty. There are two selectable

schedules available: Schedule 1 and Schedule 2. Both schedules have the same function and both

can be run simultaneously.

To access and activate the schedule 1 function tap the MENU button 3 times from the main menu