Colasit CDVA 400 Manual de operação - Página 4

Procurar online ou descarregar pdf Manual de operação para Ventilador Colasit CDVA 400. Colasit CDVA 400 16 páginas. Roof fan in plastic

Imprimir página

Part 1: General

General

OBLIGATIONS

Prior to any work done on or with the fan, we place you under an obligation to read this

operating manual and any further contractors' operating instructions carefully and

through to the end.

Should anything not be clear, please get in touch with us immediately. Do not put the

fan into operation as long as uncertainties exist.

As soon as you start up the fan you confirm that you have read and understood the

operating manual.

After acquainting yourself with the fan and its operational performance together with your

production processes, we recommend that you make a note of the different modes of

operation in a "process instruction".

Together with this operating manual, any acceptance documents, works acceptance certificates and the EU

Declaration of Conformity, the process instruction forms part of the complete system documentation.

For the fan, a separate risk analysis was conducted as a prerequisite for writing this operating

manual. Risks were evaluated and any remaining residual risks are pointed out in this operating

manual.

When extracting aggressive gases, it is imperative to review the suitability of the materials:

▪

Once the principal or the operator has notified us of the gas mix and the maximum

operating temperature, the suitability and any applicable restrictions will be confirmed in

the data sheet of COLASIT AG.

▪

In the absence of a written notification with regard to the extracted medium by

the principal, the operator is responsible without limitation for assessing the

suitability for the operation of the ventilator.

1.1

Definition

The term "COLASIT fan" stands for a Swiss high-quality product and contains all the components and

individual parts as specified in the purchase order or in the material parts list, which, when assembled, form

a functional unit.

1.2

Production of COLASIT-fans

The fan was manufactured using modern production methods and was extensively tested both during

manufacture and as a finished product by the COLASIT quality assurance system. The methods and

processes used in production and monitoring correspond to the state of the art. The personnel entrusted

with production of the fan have the appropriate skills and possess valid qualifications.

All fans with engine are subjected to a successful test run at the manufacturer's production facilities.

1.3

Warranty

Warranty ends on the date stated in the general terms of sale and delivery. Warranty is limited to the

delivery of spare parts or the repair of defective parts at the manufacturer's factory. Any further claims or the

replacement of non-repairable or wear parts are excluded.

We guarantee the availability of spare parts identical in construction to the original over a period of 10 years

effective from the date of delivery.

Page 4

TD-000 812-E

Edition 02/2023, Subject to alteration

COLASIT AG

Plastics construction

CH-3700 Spiez

Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61