Canon XJ80x8.8B Manual de operação - Página 9

Procurar online ou descarregar pdf Manual de operação para Lente de câmara Canon XJ80x8.8B. Canon XJ80x8.8B 44 páginas. Bctv zoom lens

Imprimir página

1-2 Mounting the

Accessories for Full-

servo Operation

The servo demand is mounted and connected as shown in

the figure below. When mounting the various demands, refer

to the operation manual for the respective demand.

① Servo module

② Zoom servo demand

③ Focus servo demand

④ Demand cable

Mounting the Servo Module onto the

Lens

It is necessary to mount the servo module to the zoom and

focus couplings located in the bottom compartment of the

lens.

NOTE

The same servo module is used for both zoom and focus couplings.

So, it can be mounted on either the zoom or focus coupling.

Before mounting a module to the lens, turn the lock

screw of the module counterclockwise until the lock

axis comes out to its a half way of length.

Press the module in the direction of arrow "A", so

that the key pins on the lens are inserted in the key

grooves of the module.

Bottom compartment of the lens

Coupling B

Coupling A

Mate the coupling A of the mudule with the coupling B

of the lens. Then, fully push the mudule in the direction

of arrow B until it stops.

Finally, turn the lock screw of the module clockwise to

secure it. By using a coin, tighten firmly the lock knob.

Next, as the same procedure, install the servo module on

the other joint. It does not matter which is installed first,

either the zoom or the focus.

NOTE

Some of the models have the index line (white line) on the

circumference of coupling B. When mating couplings A and B, push

the servo module in completely, so that the index line (white line) on

the circumference of coupling B is entirely hidden. Be sure to mount

the module completely before operation. If not, the servo module

may not operate properely or it may generate abnormal noise.

1 HOW TO MOUNT

Key

Groove

Key Pin

Servo Module

Lock

Lock Screw

Lock Axis

Lock Screw