Canon XJ95x8.6B Manual de operação - Página 5
Procurar online ou descarregar pdf Manual de operação para Lente de câmara Canon XJ95x8.6B. Canon XJ95x8.6B 44 páginas. Bctv zoom lens
Imprimir página
GENERAL SAFETY
INFORMATION
The safety warnings and cautions provided on the product
or in this operation manual must be observed.
Failure to observe these warnings and cautions may result
in injury or accident.
Read this operation manual carefully to familiarize yourself
with its contents and ensure that you can operate the
product properly.
Also, store this manual in a safe place where it can easily be
referenced whenever necessary.
This operation manual uses the following symbols and terms
to identify hazards in order to prevent accidents.
WARNING
CAUTION
NOTE
HANDLING THE PRODUCT
WARNING
1. Do not get this product wet or allow liquid inside. If
water gets inside, stop using the product immediately.
Continuing to use the product under this condition may
cause a fire or electric shocks.
2. Do not stare at the sun or other bright objects through the
lens. It may injure your eyes.
3. Be sure to hold the connector when disconnecting the
cable. Pulling on the cable may sever or damage it and
pose a risk of a fire or electric shocks from a short circuit.
CAUTION
1. Be careful not to drop the product when carrying it.
Dropping the product may cause injury.
2. Ensure that all mountings are securely tightened. If a
mounting becomes loose, parts may fall off and cause
injury.
3. Inspect mountings regularly (about every six months
to one year) to ensure they are securely tightened. If a
mounting becomes loose, parts may fall off and cause
injury.
4. When this product is used under a blazing sun, the
inside of the unit may be heated to high temperature.
When it is expected that the unit is exposed to elevated
temperature, take measures against heat as appropriate
on the customer's side.
T h i s i n d i c a t e s a p o t e n t i a l l y
hazardous situation which, if not
heeded, may result in death or
serious injury to you or others. Be
sure to heed all warning notices to
ensure safe operation at all times.
This indicates a potentially hazardous
situation which, if not heeded, may
result in a minor injury to you or
others, or damage to property.
T h i s i n d i c a t e s c a u t i o n s a n d
recommendations for operation. It
contains information which, if not
heeded, may result in this product
failing to function properly.
These notices also contain useful
information for operation.
NOTE
1. Striking or dropping the lens may cause the malfunction
of the product.
2. This product is not waterproof. Take measures to avoid
direct contact with rain, snow, or moisture. Otherwise it
may cause the malfuction of the product.
3. In dusty environments, cover the lens mount when using,
attaching or removing the lens. If dust enters inside, it
may cause the malfunction of the product.
4. Take measures to avoid sudden changes in temperature
where the lens is used, which may prevent operation
temporarily if condensation forms in the lens.
5. Before use in particular environments, such as places
where chemical products are used, contact your Canon
sales representative or dealer.
6. Many glass components and precision parts are to be
found inside of the product. Be sure to heed the following
cautions to avoid the damage by the vibration or the
shock.
• Be sure to keep the horizontal position (sideways-
facing) as same as it is used when tranporting the
product. Exposing the product in the vertical (upright)
position to the strong impact may cause the damage
by the shock or the vibration. Also ask the capable
forwarder for transportation. And inform the forwarder
in advance that the product is the precision device.
• Before use the product with the carrying case
arranged separately, contact your Canon sales
representative or dealer.
DEALING WITH
ABNORMALITIES
WARNING
Should any of the abnormalities described below occur,
immediately dismount the lens from the camera and
contact your Canon sales representative or dealer.
• Smoke, fumes, or unusual noises
• Entry of foreign objects (such as liquid or metal objects)
inside the product
MAINTENANCE AND
INSPECTION
WARNING
Be sure to disconnect the cable and remove the lens
from the camera before cleaning outside of the lens. Do
not use benzene, thinner, or other flammable substances
to clean the product. Otherwise it may cause a fire or
electric shocks.
NOTE
1. Clean off any dust on the lens surface using a lens
blower or a soft lens brush. In case of getting fingerprints
or stains on the lens, use a clean cotton cloth moistened
with commercial lens cleaning fluid, or use lens cleaning
paper. Gently wipe in a spiral pattern from the center of
the lens. Be careful not to rub dust across the lens, which
may scratch the lens surface
2. Routine inspection about once a year is recommended,
depending on the conditions and environment of use.
Request overhaul, if needed.