Astrol Electronic BAT-FLEX Manual - Página 8

Procurar online ou descarregar pdf Manual para Instrumentos de medição Astrol Electronic BAT-FLEX. Astrol Electronic BAT-FLEX 19 páginas.

3. CCCC Setup

First of all the CCCC-Folder needs to be moved from CD to the local hard drive. From there the application can be started by executing

„cccc.exe". No additional installation is required.

After setting the IP address correctly the application needs to be restarted.

Astrol Electronic AG reserves the right to change specifications without notice

Bat FLEX Manual

On startup the application searches for a viable device on the

Network. If the device is not yet configured, the first action after

the main window shows up is to get into the communication

setup by right-clicking on „Astrol Box <x>".

Devices can be connected troughSerial Port (BatSmall Series) or

Ethernet (BatFlex Series). This Manual focuses on the Ethernet

Version.

The important parameters are marked red:



IP Address: The device IP address, can be configured

on the small device screen.



Network device port: Communication port ,default

port is 16723



Communication mode has to be set to „Ethernet

UDP/IP".

8/19

AD-10069-007 Rev. 03