Basic Settings
You can perform settings on the camera, such as setting the camera owner's name and setting
the date and time.
Click the [Camera settings/Remote shooting] button.
1
The camera settings window appears.
Click [
].
2
The basic settings window appears.
Click again to close the basic settings
window.
You can shoot photos remotely. For remote
shooting, refer to
Chapter
4.
The above window shows information
displayable when EOS 30D or EOS DIGITAL
REBEL XTi/400D DIGITAL is connected. The
displayed information varies depending on
the camera model connected.
Click the item to be set and specify the settings.
3
The settings are applied to the camera.
The display switches to the
image download window (p.1-7).
You can set the camera's
date and time.
The camera's firmware
version is displayed, and
you can perform updates.
Displays the various
camera information.
When switching to the main window, select the [Window] menu
If you select the [File] menu
[Exit], EOS Utility exits.
The above window shows information displayable when the EOS 30D or EOS
DIGITAL REBEL XTi/400D DIGITAL is connected. The displayed information varies
depending on the camera model connected.
Initializing a memory card deletes all the data and the data cannot be recovered. Check
carefully before initializing.
You can show/hide the shot
settings window (p.2-3).
You can show/hide the basic
settings window.
You can enter up to 31
characters and register the
camera owner's name.
You can initialize the
memory card in the camera.
Closes the window.
Returns to the previous window.
[Main Window].
2-2
Cover/Table of
Contents
Introduction
1
Downloading Images
from the Camera
2
Setting the Cameras
other than the EOS-1D
Series Cameras
3
Setting the EOS-1D
Series Cameras
4
Remote Shooting
Troubleshooting
Index