Cole Hersee 24505 Manual de instalação - Página 2
Procurar online ou descarregar pdf Manual de instalação para Equipamento industrial Cole Hersee 24505. Cole Hersee 24505 2 páginas. Lockout lever kit for master disconnect switch
Imprimir página11. Remove the Mounting nut and lock washer
from the stem
12. Remove the switch from the panel
13. Drill two 5/32" holes at the marks from the
bracket
14. Attach the bracket with the two screws
provided
15. Place the switch through the hole in the bracket
16. Replace the lock wash and nut on the stem of
the switch and tighten finger tight.
17. Replace the locking handle on the switch using
the screw and lock washer from the original
lever.
18. Rotate the switch until the hole on the top of
the bracket lines up with the hole on the
locking handle.
19. Tighten the hex nuts to a maximum torque of
20 ft-lbs.
Ø 13
[Ø20.6]
16
Standard Master Disconnect Mounting Pattern
Direct Questions to [email protected]
Please consult the factory if you need further assistance
617-268-2100
8am — 4:30 PM Eastern Time
www.colehersee.com
IF-153 Rev. B
IF-153
Rev. B
Ø 5
[Ø7.9]
16
Required for Switches
with Indexing Pin
0.813 [20.65]
Other Cole Hersee Battery
Management Products
48510 200A Low Voltage Disc.
48511 100A Low Voltage Disc.
48512 150A Low Voltage Disc.
Pin 4 - Ignition
Override
Pin 3 - LED/Alarm
(Warning)
48513 125A Compact LVD
CONNECTOR TO ACCEPT
DEUTSCH DT06-4S CONNECTOR
4.50 [114]
4.00 [102]
4.27 [109]
48530 200A Smart Isolator
48525 85A Smart Isolator
Battery
HEX NUT,
Terminal
1/4-20, TYP
Pin 1 - Ground
Pin 2 - Manual
Over Ride
Ø0.28 [Ø7]
2.10 [53]
Load
Terminal