Canon MLT (S) Manual do utilizador - Página 22

Procurar online ou descarregar pdf Manual do utilizador para Software Canon MLT (S). Canon MLT (S) 28 páginas. Cxdi image processing software

3.QA Mode Settings

3.4 Changing Dynamic Range Adjustment

Enable dynamic range adjustment (DARK REGION)

Each time [DARK REGION] is touched, the setting switches between the highlight

(white outline characters against a colored background) and normal display. This is

enabled when in the highlighted state.

Screen Appearance when Dynamic Range Adjustment (DARK REGION) is Enabled

Set the maximum density

Touch the

20.

The value on the left is the setting saved previously, and the value on the right is the

modified value.

This value determines the maximum density assigned to the subject range. Larger values

result in higher maximum densities, and smaller values result in lower maximum densities.

NOTE:

If the EFFECT parameter is set to a value that is too low, artifacts can occur

in the image, or the effective data of the exposure image may be damaged.

Check the exposure image, and if the image is proccessed excessively, either

set to a larger maximum density or disable the setting.

button, and set the EFFECT parameter within the range between 1 to

– 16 –