Asus 90MB10C0-M0EAY0 Manual - Página 13

Procurar online ou descarregar pdf Manual para Placa-mãe Asus 90MB10C0-M0EAY0. Asus 90MB10C0-M0EAY0 29 páginas.
Também para Asus 90MB10C0-M0EAY0: Manual de início rápido (2 páginas)

Imprimir página

Clear RTC RAM (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of

the system setup information such as date, time, and system

passwords.

To erase the RTC RAM:

Turn OFF the computer and unplug the power cord.

Use a metal object such as a screwdriver to short the

two pins.

Plug the power cord and turn ON the computer.

Hold down the <Del> key during the boot process and

enter BIOS setup to re-enter data.

If the steps above do not help, remove the onboard battery and short the two pins again

to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.

Serial port connector (10-1 pin COM)

This connector is for a serial (COM) port. Connect the serial port module cable to

this connector, then install the module to a slot opening at the back of the system

chassis.

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital

Interface (S/PDIF) port. Connect the S/PDIF Out module

cable to this connector, then install the module to a slot

opening at the back of the system chassis.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

HD Audio standard. Connect one end of the front panel audio I/O module cable to

this connector.

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard's high-definition audio capability.

PCI Express 2.0 x1 slots

This motherboard has three PCI Express 2.0 x1 slots that support PCI Express

x1 network cards, SCSI cards, and other cards that comply with the PCI Express

specifications.

PCI Express 3.0 / 2.0 x16 slots

This motherboard supports two PCI Express 3.0 / 2.0 x16 graphic cards that

comply with the PCI Express specifications.

Chapter 1: Product introduction

CLRTC

PIN 1

SPDIF_OUT

1-4