DOREMIDI MPC-10 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Conversor de multimédia DOREMIDI MPC-10. DOREMIDI MPC-10 8 páginas. Midi pedal converter
Também para DOREMIDI MPC-10: Manual de instruções (9 páginas)
Imprimir página4. Steps for usage
1. Connection
Power supply: Use a 5V USB adapter to power the MPC-10 through the USB interface, or
directly connect to the computer through the USB interface, and power the MPC-10 through
the computer. The indicator light flashes when the power is only supplied, and the indicator
light is always on when it is connected to the computer.
MIDI DIN connection: Connect the MIDI OUT of the MPC-10 to the MIDI IN interface of the
MIDI device through a 3.5 to MIDI DIN 5-pin cable.
Pedal connection: Connect the pedal to the EXP1 or EXP2 interface of the MPC-10 through the
6.35 interface.
2. Configure pedal MIDI messages
Before using MPC-10, you need to use "Pedal Config Tool" software to configure pedal MIDI
messages. After configuration, the pedal's MIDI messages will be output via USB and MIDI OUT. It
is recommended to connect the pedal before configuration. Please download the software from
the official website:
(Note: If the pedal MIDI message is not configured, MPC-10 uses the default value. The default value of
the expression pedal is MIDI CC = 21; the default value of the single switch type pedal is MIDI CC = 64 (Sustain);
the default value of the dual switch pedal is MIDI CC = 64 (Sustain), MIDI CC = 66 (Sostenuto).)
The following are the steps to configure the MIDI message of the pedal:
Connect the pedal: Connect the pedal to the EXP1 or EXP2 interface of MPC-10 through the
6.35mm interface.
Connect to a computer: Connect to a computer through a USB interface. After the connection
is successful, the indicator light is always on.
(Note: Generally speaking, computers come with MIDI drivers. If you find that your computer does not
have
MIDI
drivers,
https://windowsreport.com/install-midi-drivers-pc/)
Open the configuration software (Pedal Config Tool) , as follows:
www.doremidi.cn
you
need
to
install
MIDI
drivers.
Installation
method: