DOREMIDI FC-3 Manual de instruções - Página 5
Procurar online ou descarregar pdf Manual de instruções para Equipamento de gravação DOREMIDI FC-3. DOREMIDI FC-3 8 páginas. Midi foot controller
Imprimir página
a.
Software environment requirements: Windows 7 and above, MacOS.
b.
Select the appropriate serial port number "COMxx" and click "Connect".
c.
Click "CHECK" to get the current pedal settings.
d. Pedal Number: The number of the current pedal, 1~3 is the switch pedal, 4 is the
expression pedal.
e.
Message Number: FC-3 can be configured with 1~16 independent MIDI message
groups, each group can be configured with 3 switch pedals and 1 expression pedal.
f.
Pedal Type: Pedal type, there are Expression (Expression), Switch (switch type). After
connecting the pedal, click "CHECK" to get the pedal type. If the pedal is not
connected, you can also directly select the pedal type to set.
does not support connecting Hi-Hat pedals)
g.
MIDI Channel: Set the channel of MIDI messages, there are 1~16 MIDI channels;
h.
STATUS: Set the MIDI status of the pedal. The MIDI status of different pedals is
different, as shown in the figure:
STATUS
Pedal Type
Expression Pedal
Switch Pedal
i.
DATA1/DATA2 Range: Set the range of pedal MIDI messages. When the pedal is
pressed, FC-3 will send MIDI messages within the range.
j.
Gain: Set the gain of MIDI messages, which can be set to OFF, 1~100. After setting,
the MIDI messages will increase in multiples of 1~100%, and the value is still within the
range of DATA1/DATA2 Range.
pedal. After setting the gain, the pedal can reach the maximum value without stepping pedal
down to the end)
k.
MODE: Set the trigger mode of the switch pedal, with Single, Toggle, Reset, Increase,
Decrease five trigger modes:
CC
PC
NOTE
✔
✔
✔
✔
✔
(Note: Gain value is generally used for the expression
(Note: FC-3 temporarily
Pitch Bend
Channel Pressure
✔
✔