Asus AT5NM10T-I NA Manual do utilizador - Página 18
Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe Asus AT5NM10T-I NA. Asus AT5NM10T-I NA 42 páginas. User manual
Também para Asus AT5NM10T-I NA: Manual do utilizador (43 páginas)
Imprimir página
2.
Keyboard/mouse power setting (3-pin PS2_USBPW1-6)
This jumper allows you to enable or disable the keyboard/mouse and USB port 1-6
wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up
the computer by pressing a key on the keyboard, clicking the mouse or using a USB
device. This feature requires an ATX power supply that can supply at least 1A on the
+5VSB lead, and a corresponding setting in the BIOS. The PS2_USBPW1-6 jumper is
for the rear USB ports.
AT5NM10T-I Keyboard/mouse power setting
The total current consumed must NOT exceed the power supply capability (+5VSB)
whether under normal condition or in sleep mode.
3.
USB device wake-up (3-pin USBPW7-8)
Set this jumper to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
AT5NM10T-I USB device wake-up
• The USB device wake-up feature requires a power supply that can provide 500mA on
• The total current consumed must NOT exceed the power supply capability (+5VSB)
ASUS AT5NM10T-I
PS2_USBPW1-6
1
+5V
USBPW78
1
+5V
(Default)
the +5VSB lead for each USB port; otherwise, the system would not power up.
whether under normal condition or in sleep mode.
2
2 3
+5VSB
(Default)
2
2 3
+5VSB
1-8