Asus B150-A Manual do utilizador - Página 18

Procurar online ou descarregar pdf Manual do utilizador para Placa-mãe Asus B150-A. Asus B150-A 27 páginas. Pin definition
Também para Asus B150-A: Manual técnico (18 páginas)

Imprimir página

System memory

Overview

This motherboard comes with four Double Data Rate 4 (DDR4) Dual Inline Memory Module

(DIMM) sockets. The figure illustrates the location of the DDR4 DIMM sockets:

•

You may install varying memory sizes in Channel A and Channel B. The system

maps the total size of the lower-sized channel for the dual-channel configuration. Any

excess memory from the higher-sized channel is then mapped for single-channel

operation.

•

Always install the DIMMS with the same CAS Latency. For an optimum compatibility,

we recommend that you install memory modules of the same version or data code

(D/C) from the same vendor. Check with the vendor to get the correct memory

modules.

•

According to Intel

the CPU.

•

Due to the memory address limitation on 32-bit Windows

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you do any of the

following:

Visit the ASUS website at www.asus.com for the latest QVL.

Installing a DIMM

To remove a DIMM

ASUS B150-A

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

CPU spec, DIMM voltage below 1.35V is recommended to protect

Use a maximum of 3 GB system memory if you are using a 32-bit Windows

I nstall a 64-bit Windows

motherboard.

F or more details, refer to the Microsoft

com/kb/929605/en-us.

Channel

Channel A

Channel B

OS if you want to install 4GB or more on the

support site at http://support.microsoft.

Sockets

DIMM_A1 & DIMM_A2

DIMM_B1 & DIMM_B2

OS, when you install 4GB

OS.

1-9